Visaton open baffle project idea, opinions?

[UweG]

But I had a little problem with the woofer settings, when I set the "Volume increase factor" to 1, the woofer response jumped to the top of the chart. When it changed it to 0.0000001, it seemed to work. I hope this does not make the results invalid.

This is a bug in Boxsim 2.0. Best workaround is what jama already did. He used a newer driver file. This bug happens to all drivers that are measured on the wide side of the old test box.
It will be corrected in the next version.

[jama]

whit SC13 or WS-13E

[jama]

hi dave, sorry i speak french or german

I have simplified the filter

for a modest budget take the excellent and low budget SC13 instead of the AL130

[DaveFred]

Hello From Canada!

Sorry, I don't speak German, but I came here for the Visaton Expertise!

I am looking to make an all Visaton open baffle speaker with a maximum width of 38cm and maximum height of 120cm.

The budget is to be modest using a pair of inexpensive high QTS WS25E-8 10" woofers, an AL130M-8 for the important midrange and the G20SC for a tweeter with good off axis response.

I have attached a few graphics and the .BPJ file if anyone wants to look at it.

I followed the open baffle instructions for Boxsim at,

http://www.boxsim.de/FAQ/FAQ0011.html

But I had a little problem with the woofer settings, when I set the "Volume increase factor" to 1, the woofer response jumped to the top of the chart. When it changed it to 0.0000001, it seemed to work. I hope this does not make the results invalid.

What do you think?